Большое обновление пильных узлов

Смотреть

Тип техники

Бренд

Машина

Большое обновление пильных узлов

Смотреть

Открытый узел

REPLACEMENT HEAVY-DUTY BUCKETS (WITH CURVED PIVOT PLATES) [02F24]

Серийный номер

Бренд

John Deere

Читать описание

100

баллов

Нашли неточность, знаете аналог или есть вопрос?

Воспользуйтесь этой формой и получите бонусы

№ на схеме	Серийный номер	Кол-во	Название	Описание
1	T38876	1	CUTTING EDGE	SIDE, 15.9 MM X 127.0 MM X 876.3 MM (5/8" X 5" X 34-1/2")
2	T38856	1	CUTTING EDGE	FRONT, 22.2 MM X 152.4 MM X 425.5 MM (7/8" X 6" X 16-3/4") 457.2 MM (18") BUCKET
2	T38862	1	CUTTING EDGE	FRONT, 22.2 MM X 152.4 MM X 577.9 MM (7/8" X 6" X 22-3/4") (FOR 609.6 MM (24") BUCKET)
2	T38865	1	CUTTING EDGE	FRONT, 22.2 MM X 152.4 MM X 730.3 MM (FOR 762.0 MM (30") BUCKET)
3	T40910	1	PIN	(4 USED WITH 457 MM (18") AND 610 MM (24"), 5 USED WITH 762 MM (30") BUCKETS)
4	U43792	1	Bucket Tooth Adapter	(SUB FOR (AR) U42750) 23.8 MM (15/16") (4 USED WITH 457 MM (18") AND 610 MM (24"), 5 USED WITH 762 MM (30") BUCKETS)
5	U42751	1	POINT	(4 USED WITH 467 MM (18") AND 610 MM (24"), 5 USED WITH 762 MM (30") BUCKETS)
6	T38875	1	CUTTING EDGE	SIDE, R.H., 15.9 MM X 127.0 MM X 876.3 MM (5/8" X 5" X 34-1/2") (WITH AT37726, AT37727, AT37728, AT76972, AT76971 AND AT76969)
7	T230SP	1	Tooth	(SUB FOR T54317) (4 USED WITH 457 MM (18") AND 610 MM (24"), 5 USED WITH 762 MM (30") BUCKETS)
8	T105988	4	Bushing	(SUB FOR U42739)
9	T105987	2	BUSHING	(SUB FOR U42736)
10	-	1	Part 12	L.H., WITH BUSHINGS, (SUB AT36086)
11	28H2196	1	SPACER	1-1/2" X 6"
12	U11649	2	WASHER	-
13	11H221	4	COTTER PIN	3/8" X 2-1/2"
14	AU42334	1	PIN FASTENER	(SUB (2) U11649, (2) 11H221 AND T125931) COUPLER LINKS TO BUCKET
14	T125931	1	PIN FASTENER	(DOES NOT INCLUDE WASHERS OR COTTER PINS)
15	-	1	Part 18	R.H. WITH BUSHINGS, (SUB AT36086)
16	U11650	2	WASHER	-
17	AU42333	1	PIN FASTENER	(SUB (2) U11650, (2) 11H221 AND T125926) BUCKET TO DIPPERSTICK
17	T125926	1	PIN FASTENER	(DOES NOT INCLUDE WASHERS OR COTTER PINS)
18	-	1	Part 22	23.9 MM (15/16") (USED WITH AT76972 AND AT76971, 5 USED WITH AT76969 BUCKETS) (USE WITH 22.3 (7/8" CUTTING EDGE) ( AU41838 - NO LONGER AVAILABLE) (SUB T40910, U43792 AND U42751)
19	AT36086	1	PLATE	-
20	-	1	Part 24	457.2 MM (18") (USE AT76972 IF AVAILABLE) (SUB AT114261)
20	-	1	Part 25	609.6 MM (24") (USE AT76971 IF AVAILABLE) (SUB AT114258)
20	-	1	Part 26	762.0 MM (30") ( AT76969 NO LONGER AVAILABLE, ORDER INDIVIDUAL PARTS)

REPLACEMENT HEAVY-DUTY BUCKETS (WITH CURVED PIVOT PLATES) [02F24]

Нет текстового описания